An Air-Corridor Interconnect Structure
*** THIS PROJECT IS NO LONGER ACTIVE ***
Jemin Park and Chenming Hu
A novel mostly-air interconnect structure is proposed. Every metal line is surrounded by an air arch on the sides and overhead. It is supported on the bottom by a series of solid dielectric beams. The vias are also surrounded by air sheaths. The arch of an air gap has not only lower effective capacitance but also higher stability of structure. Raphael simulation shows that the total capacitance is reduced by about 45% and the RC delay is decreased about 55%. The effective dielectric constant can be reduced to about 1.7 using existing dielectric with k=2.9.
- B. Shieh, K.C. Saraswat, J.P. McVittie, S. List, S. Nag, M. Islamraja, and R.H. Havemann, "Air-Gap Formation During IMD Deposition to Lower Interconnect Capacitance", Electron Device Letters, VOL. 19, NO. 1, January 1998
- M.B. Anand, Masaki Yamada, and Hideki Shibata, "Use of Gas as Low-k Interlayer Dielectric in LSI's: Demonstration of Feasibility", Electron Device, VOL. 44, NO. 11, November 1997
- Chung-Hui Chen, Yean-Kuen Fang, Chun-Sheng Lin, Chih-Wei Yang, Tang-Cheng Hsieh, "A novel multi-level interconnect scheme with air as low K inter-metal dielectric for ultradeep submicron application", Solid-State Electrons 45 (2001) pp.199-203
- RAPHAEL User Manual, Synopsys, Mountain View, CA