Fast 3D Simulation and Compensation for Buried Defects in Extreme Ultraviolet Masks with Absorber Features
Chris Heinz Clifford and Andrew R. Neureuther
Extreme Ultraviolet (EUV) lithography is a leading candidate for next generation integrated circuit manufacturing. EUV lithography represents a major change from current methods and significant development is still needed for it to be implemented successfully.
A new simulator, RADICAL (Rapid Absorber Defect Interaction Computation for Advanced Lithography) has been created that can simulate a 3D EUV mask with a buried defect 400 times faster than rigorous electromagnetic methods while still maintaining comparable accuracy. RADICAL simulates the multilayer stack and absorber pattern separately, using methods optimal for each. It links the results of the two simulators using Fourier optics. RADICAL allows multiple simulations to be done very quickly, which opens up new research opportunities.
One new area of research is to leverage RADICAL to develop compensation methods for EUV defects. Once compensation techniques are developed and tested using RADICAL, masks with a large buried defects will made useful by modifying only the absorber pattern to compensate for the defect. This will be a very inexpensive solution to the problem of buried defects in EUV lithography.
Figure 1: Example cross-section geometry of an EUV mask with a buried multilayer defect
Figure 2: Block diagram representing the operation of RADICAL
- C. H. Clifford and A. R. Neureuther, "Fast Three-Dimensional Simulation of Buried EUV Mask Defect Interaction with Absorber Features," Proceedings of SPIE, Vol. 6730, 2007.
- C. H. Clifford and A. R. Neureuther, "Fast Simulation of Buried EUV Mask Defect Interaction with Absorber Features," Proceedings of SPIE, Vol. 6517, 2007.