Emily Naviasky

EECS Department, University of California, Berkeley

Technical Report No. UCB/EECS-2023-44

May 1, 2023

http://www2.eecs.berkeley.edu/Pubs/TechRpts/2023/EECS-2023-44.pdf

Massive multi-user MIMO is a promising technique to increase capacity with spatial filtering for spectrum reuse, and increasing SNR through array gain. There are many advantages to increasing antenna and user count in these arrays, but there is also much debate on how best to do so efficiently. An especially important decision is where to place the beamformer in the signal chain. This work proposes a hardware informed model for comparison between analog and digital beamforming, breaking down the decision into intuitive designer chosen specifications and comparing in power. The model finds that analog baseband beamforming is critical for scaling to wide-bandwidth and large arrays, especially in the presence of interferers. The hardware assumptions in the model are tested in a 16x16 beamforming receiver array in 28nm silicon. Design techniques such as noise or bandwidth limited design, two stage beamforming, and offset correction are used in the circuit implementation. The ASIC was packaged and used in a real time demonstration which performs multi-user and multi-panel operation.

Advisors: Ali Niknejad and Elad Alon


BibTeX citation:

@phdthesis{Naviasky:EECS-2023-44,
    Author= {Naviasky, Emily},
    Title= {Scaling Phased Array Receivers to Massive MIMO and Wide Bandwidth with Analog Baseband Beamforming},
    School= {EECS Department, University of California, Berkeley},
    Year= {2023},
    Month= {May},
    Url= {http://www2.eecs.berkeley.edu/Pubs/TechRpts/2023/EECS-2023-44.html},
    Number= {UCB/EECS-2023-44},
    Abstract= {Massive multi-user MIMO is a promising technique to increase capacity with spatial filtering for spectrum reuse, and increasing SNR through array gain. There are many advantages to increasing antenna and user count in these arrays, but there is also much debate on how best to do so efficiently. An especially important decision is where to place the beamformer in the signal chain. This work proposes a hardware informed model for comparison between analog and digital beamforming, breaking down the decision into intuitive designer chosen specifications and comparing in power. The model finds that analog baseband beamforming is critical for scaling to wide-bandwidth and large arrays, especially in the presence of interferers. The hardware assumptions in the model are tested in a 16x16 beamforming receiver array in 28nm silicon. Design techniques such as noise or bandwidth limited design, two stage beamforming, and offset correction are used in the circuit implementation. The ASIC was packaged and used in a real time demonstration which performs multi-user and multi-panel operation.},
}

EndNote citation:

%0 Thesis
%A Naviasky, Emily 
%T Scaling Phased Array Receivers to Massive MIMO and Wide Bandwidth with Analog Baseband Beamforming
%I EECS Department, University of California, Berkeley
%D 2023
%8 May 1
%@ UCB/EECS-2023-44
%U http://www2.eecs.berkeley.edu/Pubs/TechRpts/2023/EECS-2023-44.html
%F Naviasky:EECS-2023-44