Electrical Engineering
      and Computer Sciences

Electrical Engineering and Computer Sciences

COLLEGE OF ENGINEERING

UC Berkeley

Sawmill: A Logging File System for a High-Performance RAID Disk Array

Kenneth William Shirriff

EECS Department
University of California, Berkeley
Technical Report No. UCB/CSD-95-862
February 1995

http://www.eecs.berkeley.edu/Pubs/TechRpts/1995/CSD-95-862.pdf

The widening disparity between processor speeds and disk performance is causing an increasing I/O performance gap. One method of increasing disk bandwidth is through arrays of multiple disks (RAIDs). In addition, to prevent the file server from limiting disk performance, new controller architectures connect the disks directly to the network so that data movement bypasses the file server. These developments raise two questions for file systems: how to get the best performance from a RAID, and how to use such a controller architecture.

This thesis describes the implementation of a high-bandwidth log-structured file system called "Sawmill" that uses a RAID disk array. Sawmill runs on the RAID-II storage system; this architecture provides a fast data path that moves data rapidly among the disks, high-speed controller memory, and the network.

By using a log-structured file system, Sawmill avoids the high cost of small writes to a RAID. Small writes through Sawmill are a factor of three faster than writes to the underlying RAID. Sawmill also uses new techniques to obtain better bandwidth from a log-structured file system. By performing disk layout "on-the-fly," rather than through a block cache as in previous log-structured file systems, the CPU overhead of processing cache blocks is reduced and write transfers can take place in large, efficient units.

The thesis also examines how a file system can take advantage of the data path and controller memory of a storage system such as RAID-II. Sawmill uses a stream-based approach instead of a block cache to permit large, efficient transfers.

Sawmill can read at up to 21 MB/s and write at up to 15 MB/s while running on a fairly slow (9 SPECmarks) Sun-4 workstation. In comparison, existing file systems provide less than 1 MB/s on the RAID-II architecture because they perform inefficient small operations and don't take advantage of the data path of RAID-II. In many cases, Sawmill performance is limited by the relatively slow server CPU, suggesting that the system would be able to handle larger and faster disk arrays simply by using a faster processor.

Advisor: John K. Ousterhout


BibTeX citation:

@phdthesis{Shirriff:CSD-95-862,
    Author = {Shirriff, Kenneth William},
    Title = {Sawmill: A Logging File System for a High-Performance RAID Disk Array},
    School = {EECS Department, University of California, Berkeley},
    Year = {1995},
    Month = {Feb},
    URL = {http://www.eecs.berkeley.edu/Pubs/TechRpts/1995/5397.html},
    Number = {UCB/CSD-95-862},
    Abstract = {The widening disparity between processor speeds and disk performance is causing an increasing I/O performance gap. One method of increasing disk bandwidth is through arrays of multiple disks (RAIDs). In addition, to prevent the file server from limiting disk performance, new controller architectures connect the disks directly to the network so that data movement bypasses the file server. These developments raise two questions for file systems: how to get the best performance from a RAID, and how to use such a controller architecture. <p>This thesis describes the implementation of a high-bandwidth log-structured file system called "Sawmill" that uses a RAID disk array. Sawmill runs on the RAID-II storage system; this architecture provides a fast data path that moves data rapidly among the disks, high-speed controller memory, and the network. <p>By using a log-structured file system, Sawmill avoids the high cost of small writes to a RAID. Small writes through Sawmill are a factor of three faster than writes to the underlying RAID. Sawmill also uses new techniques to obtain better bandwidth from a log-structured file system. By performing disk layout "on-the-fly," rather than through a block cache as in previous log-structured file systems, the CPU overhead of processing cache blocks is reduced and write transfers can take place in large, efficient units. <p>The thesis also examines how a file system can take advantage of the data path and controller memory of a storage system such as RAID-II. Sawmill uses a stream-based approach instead of a block cache to permit large, efficient transfers. <p>Sawmill can read at up to 21 MB/s and write at up to 15 MB/s while running on a fairly slow (9 SPECmarks) Sun-4 workstation. In comparison, existing file systems provide less than 1 MB/s on the RAID-II architecture because they perform inefficient small operations and don't take advantage of the data path of RAID-II. In many cases, Sawmill performance is limited by the relatively slow server CPU, suggesting that the system would be able to handle larger and faster disk arrays simply by using a faster processor.}
}

EndNote citation:

%0 Thesis
%A Shirriff, Kenneth William
%T Sawmill: A Logging File System for a High-Performance RAID Disk Array
%I EECS Department, University of California, Berkeley
%D 1995
%@ UCB/CSD-95-862
%U http://www.eecs.berkeley.edu/Pubs/TechRpts/1995/5397.html
%F Shirriff:CSD-95-862